Film and decoration projects do not pay attention to the protection of finished products, it is easy to encounter rights protection

Many companies have such confusion. The standard configuration standards for firing and repair products are very high, the limit is very high, and the effect map is beautiful. The project that has been done is destroyed, the money is spent, the effect is far from expected

This article combines daily work experience, combing the finished product protection measures for fine decoration projects for everyone to refer to daily work reference

1. Get in and indoor wooden doors

Responsible unit:

Doors and window installation units (the installation unit transfers the door key to the decoration and repair total bag after the decoration total bag is responsible for care)

Implementation time:

After the door fan is installed

精装修项目不注意成品保护,很容易遭遇维权

Demolition time:

精装修项目不注意成品保护,很容易遭遇维权

After detailed rectification

Suggestion method:

① During the installation of the door fan, the protective film should be avoided during the installation.

② After the door leaf is qualified, use the finished corrugated paper to be filled with the door of the entrance door in time, and fix it with tape.

③ The corner of the door cover is protected by the finished cardboard with adhesion.

Cleaning requirements:

It is strictly forbidden to use paint diluted agents, paint pine perfumes, and dyshanes to wipe the paint surface. It is forbidden to use a metal tool to rub the surface of the door fan to prevent scratches on the surface, and wipe the dust with a dry cloth.

精装修项目不注意成品保护,很容易遭遇维权

2. Aluminum alloy doors and windows

Aluminum alloy doors and window installation units

Before the glass film is installed, the door frame is protected after installation.

Before cleaning.

Suggestion method 1:

① The door and window frame is full of protective adhesive paper. Note that 10mm should be left on the edge of the frame to facilitate the sealing rubber seal or cement mortar.

② Glass paste plastic film protection.

③ The bottom frame of the aluminum alloy door is made into a U -shaped slot for protection.

④ Plastic film is covered with a plastic film.

Suggestion method 2:

① Use the molding hard plastic protective cover protection window frame

Clean the doors and windows, protect the rubber paper properly, be careful not to scratch, scrape the surface of the aluminum doors and windows, and not use a cleaning agent with corrosive aluminum profiles, glass, and accessories.

3. Steel railing, balcony railing

Railing installation unit

After the installation is complete

① Use plastic cloth or pearl cotton full bars. If there is a glass, it is protected by corrugated paper after the glass covers.

② The corner of the handrail of the stairs railings is wrapped in 3 layers of 3mm thick pearl cotton.

It is strictly forbidden to use paint diluted agents, paint pine perfumes, diopine, oxalic acid and other solutions to wipe the metal surface. Do not use metal tools to spat the spray plastic surface to prevent scratches on the surface. Wipe it with a clean and non -color rag

4. Elevator (construction period)

The elevator installation unit is responsible for installation, and the total construction contract is responsible for maintenance.

After the renovation of the elevator car is completed and the elevator door cover is installed. Demolition time: After the detailed rectification is completed.

① Keep the inner surface protective film of the elevator, and a fine woodworking board in the protective film. The protective board that can be installed on the control box must be installed at the elevator control board. ② After the acceptance is qualified, remove the garbage and miscellaneous objects of the stones and the corner position. Use a suitable size finished corrugated paper plate to disassemble the door sleeve shape, and use tape to fix it on the outer tiles. And use a slightly hard board to strengthen protection at the corner area.

③ The car entrance pedal is made of active protective board.

④ The elevator summon button is full of protective film.

⑤ The total contract unit assigned a special person to operate the elevator holding an elevator driving permit. In use, it is necessary to keep the car clean and hygienic, not overload.

精装修项目不注意成品保护,很容易遭遇维权

Disable the corrosive solution during cleaning to avoid erosion and non -rust steel, stone and plastic accessories, and wipe it with a clean cotton wet water.

Click to follow, view more dry goods articles in time

5. Elevator (before delivery)

The hardcover engineering construction unit is responsible for installation and maintenance.

精装修项目不注意成品保护,很容易遭遇维权

5 days before the group delivery acceptance

The property depends on the situation of the small owner.

① Keep the inner surface protective film of the elevator and spread the finished furniture board outside the protective film. The elevator control board needs to be installed at the protective board for manipulation box repair.

② The seams of the sector must use the finished finishing line to build the line;

③ The elevator summon button is full of protective film. In use, you need to keep the car clean and hygienic, not overload

Disable corrosive solutions during cleaning, avoid erosion stainless steel, stone and plastic accessories, wipe it with clean cotton wet water

6. Wall brick yang corner

Construction unit

精装修项目不注意成品保护,很容易遭遇维权

After the construction is completed, after the acceptance is qualified. Demolition time: Before the detailed rectification is completed.

① Wipe the surface mud and garbage in time during the construction of wall tiles.

② On the third day of the wall tile inlaid stickers and the acceptance of the acceptance, the panels with a slightly harder texture of 1.7 meters or corrugated cardboard are protected from both sides.

When cleaning tile products, color cleaner and easy -to -fade clean cotton cloth (return wire) and other wiping surfaces are prohibited, and tools such as shovel and wire balls are prohibited. Wipe it with a clean and non -colored rag or a woolen scarf

7. floor tile

精装修项目不注意成品保护,很容易遭遇维权

Hardcover Engineering Construction Unit

The floor tiles are pasted, and after the acceptance is passed, it is protected in time.

After the detailed rectification is completed.

① After the floor tile is paste, clean the surface mud and garbage in time. After the surface is dry, use a dedicated sewing agent to fill and wipe it smoothly.

② Use clean colored cloth or plastic film.

③ Full a layer of finished cardboard or gypsum board on the color strip cloth or plastic film

When clean tile products, color cleaners, easy -to -colored clean cotton cloth (back silk) and other wiping surfaces are disabled. Apply a clean and non -colored rag or a towel to wipe it clean. You must not use tools such as shovel, steel ball balls and other tools on the surface of the tiles. Generally, the dust is wiped.

8. Wooden floor

Wooden floor installation unit (after installing the unit to complete the transfer of the hardcover engineering construction unit, the uniter of the hardcover engineering construction unit is responsible for care)

After the construction is completed, after the acceptance is qualified.

① clean the surface of the floor, first spread the 5mm thick moisture pad, and then use a 3mm thick fiber plate for further protection. The surrounding and connected parts are closed with tape.

② The moisture -proof pads must be sealed to prevent dust from entering the plate seam during rectification.

③ Moisture with a moisture -proof pad instead with a thin film.

④ After the floor installation is completed, when the high -level operation is completed, the ladder in the left picture needs to be made.

精装修项目不注意成品保护,很容易遭遇维权

Fix the bottom of the wooden ladder with a floor and wrap it with a carpet or sponge.

Disable the wiping surface with color cleaner, easy -to -colored cotton cloth (back silk), etc. Apply a clean and non -colored rag or a towel to wipe it clean. Forbidden use of tools such as shovel, steel ball balls and other tools on the surface of the wooden floor surface. Generally, the dust is wiped.

9. Window stones

After the installation is completed, after the acceptance is qualified.

After the acceptance is qualified, clean the surface of the window sill. Fold it with a corrugated cardboard into L, covering the surface of the window sill. At the handover and corner of the cardboard, it is necessary to fix it with a tape.

It is strictly forbidden to use corrosive cleaning agents and easy -to -fade cotton cloth. It is strictly forbidden to use tools such as shovel, steel ball balls and other tools on the surface of the window sill

10. Bathroom mirror

After the acceptance is qualified, clean the surface of the mirror. Use a foam plate or cardboard to be full, and paste the paper with beautiful paper.

It is strictly forbidden to use corrosive cleaners and fade cotton cloth. It is strictly forbidden to use shovel, steel ball balls and other shovel.

11. Bathtub

Before cleaning.

After the hardcover engineering construction unit is installed in the bathtub, the woodworking board wrapped in the size of the carpet is covered on the bathtub and fixed with a tape.

It is strictly forbidden to use a strong acid and strong alkali -based cleaning agent, and it is strictly forbidden to use hard and rough materials to contact the surface of the bathtub glaze

12. Toilet

After the installation is completed, the toilet is directly wrapped in the original packaging. Long -term water accumulation is not allowed in the toilet; the toilet lid is installed before delivery.

It is strictly forbidden to use a strong acid and strong alkali -based cleaner, and it is strictly forbidden to use hard and rough materials to contact the surface of the toilet glaze.

13. Hardware

The installation is complete

After the installation is completed, clean the surface of the hardware and protect it with the original packaging object.

It is strictly forbidden to use corrosive cleaning agents, and it is strictly forbidden to use steel ball balls, brushes and other surface surfaces.

14. Cabinet

Cabinet installation unit (Cabinet unit completes the transfer of hardcover engineering construction units, the hardcover engineering construction unit is responsible for care)

After the acceptance is qualified, clean the surface of the cabinet. Use the moisture -proof film to be covered with cabinets, and use corrugated paper to protect the cabinet and yang corners.

精装修项目不注意成品保护,很容易遭遇维权

It is strictly forbidden to use corrosive cleaners, and wipe clean with a clean, non -fading cotton cloth

15. Washing pot basin

Fang pot cabinet installation unit (after completing the construction unit of the handling of the hardcover engineering construction unit, the construction unit of the hardcover engineering construction unit is responsible for care)

After the acceptance is qualified, clean the surface of the cabinet. Use the moisture -proof film to wash the handbon, and the surrounding tattoo paper is bonded firmly.

Source: There is no management sharing (ID: ud_management). This article has been authorized and thanked the original author!

Responsible unit:

精装修项目不注意成品保护,很容易遭遇维权

Responsible unit:

Responsible unit:

Responsible unit:

Responsible unit:

Responsible unit:

Responsible unit:

Responsible unit:

Responsible unit:

Responsible unit:

精装修项目不注意成品保护,很容易遭遇维权

Responsible unit:

Responsible unit:

Responsible unit:

精装修项目不注意成品保护,很容易遭遇维权

Responsible unit:

Implementation time:

Implementation time:

Implementation time:

Implementation time:

Implementation time:

Implementation time:

Implementation time:

Implementation time:

Implementation time:

Implementation time:

Implementation time:

Implementation time:

Implementation time:

Implementation time:

Demolition time:

Demolition time:

Demolition time:

Demolition time:

Demolition time:

Demolition time:

Demolition time:

精装修项目不注意成品保护,很容易遭遇维权

Demolition time:

Demolition time:

Demolition time:

Demolition time:

Demolition time:

After detailed rectification

Suggestion method:

Suggestion method:

Suggestion method:

Suggestion method:

Suggestion method:

Suggestion method:

Suggestion method:

Suggestion method:

Suggestion method:

Suggestion method:

Suggestion method:

精装修项目不注意成品保护,很容易遭遇维权

Suggestion method:

Suggestion method:

Suggestion method:

Cleaning requirements:

Cleaning requirements:

精装修项目不注意成品保护,很容易遭遇维权

Cleaning requirements:

Cleaning requirements:

Cleaning requirements:

Cleaning requirements:

Cleaning requirements:

Cleaning requirements:

Cleaning requirements:

精装修项目不注意成品保护,很容易遭遇维权

Cleaning requirements:

Cleaning requirements:

Cleaning requirements:

Cleaning requirements:

精装修项目不注意成品保护,很容易遭遇维权

Cleaning requirements:

Before cleaning.

② Glass paste plastic film protection.

③ The bottom frame of the aluminum alloy door is made into a U -shaped slot for protection.

④ Plastic film is covered with a plastic film.

Click to follow, view more dry goods articles in time

Hardcover Engineering Construction Unit

Hardcover Engineering Construction Unit

Hardcover Engineering Construction Unit

Hardcover Engineering Construction Unit

Hardcover Engineering Construction Unit

After the detailed rectification is completed.

After the detailed rectification is completed.

After the detailed rectification is completed.

After the installation is completed, after the acceptance is qualified.

After the installation is completed, after the acceptance is qualified.

After the installation is completed, after the acceptance is qualified.

After the installation is completed, after the acceptance is qualified.

After the installation is completed, after the acceptance is qualified.

Before cleaning.

Before cleaning.

Before cleaning.

It is strictly forbidden to use corrosive cleaners, and wipe clean with a clean, non -fading cotton cloth

About the Author

You may also like these