Advantages of outer wall coatings straw paint

外墙涂料稻草漆的优点

Advant to straw paint performance

Strong decorative-straw paint is more noticeable that it has the effect of imitation mud walls. After construction, the effect of retro walls such as rammed soil and mud walls is almost the same. The color pattern can be false. Straw paint can also be designed with a lot of shapes that cannot be made by natural mud, which are very decorative.

外墙涂料稻草漆的优点

Straw paint

It is suitable for wide-straw paint to adapt to a variety of base faces. Whether it is cement brick grassroots, gypsum grassroots, foam grassroots, rough grassroots or metal grassroots, straw paint construction can be performed.

Green coatings-Straw paint is a water-based imitation stone product. It has no harmful substances such as formaldehyde and elene. It is a coating product that maintains healthy health.

Outer wall straw paint

Slip-resistant and durable-The exterior wall made of straw paint, the dirt can not be attached to it. Generally, it can be rinsed with water to restore the same as new, simple maintenance. The straw paint is durable for a long time, and the adhesion is very strong to fall off. Compared to using mud as an outer wall, the safety of straw paint is higher.

Economic and affordable-The market price of straw lacquer baggage bags is generally between 70 and 150 yuan, and the use of pure natural mud rammed soil to make walls is more than 1,000 yuan per square meter. The life of straw paint is 15 years. From the above comparison, the cost -effectiveness of straw paint is much higher, and it is a real and affordable product.

Ecological straw paint

Straw paint construction process

Step 1: First of all, the grassroots must be treated. The grassroots can be divided into flat batch or polishing, mainly to increase the adhesion and facilitate the shape. Pay attention to the temperature during construction that the temperature cannot be lower than 3 degrees Celsius. At the same time, the grassroots treatment also has a effect of removing dust and stains.

Step 2: After the grassroots are treated at the grassroots level, start construction of straw paint. Construction straw paint is generally stainless steel, and the temperature during construction must be above 2 degrees Celsius. Straw paint can only be constructed or construction multiple times. For construction multiple times, it takes about 8 hours in the middle. After the straw paint is sprayed, it is ventilated and dry for 24 hours.

Straw paint construction

外墙涂料稻草漆的优点

Step 3: Now to polish the dry straw paint layer, use 400 mesh-600-mesh specifications of sandpaper to smooth the sand particles on the surface of the straw paint. Be careful not to be too hard when polishing, and do not cause the paint film to loosen and fall off. Stop it evenly, don’t be impatient.

外墙涂料稻草漆的优点

Step 4: After polishing, spray protection or use hand wax. The tool used is a pot spray gun or towel. Spray protection should be sprayed twice, and the interval is also 2 hours. After completion, you need to wait for drying for a week before you can put it into use.

For more straw lacquer knowledge, please private message Xiaobian or interact with the editor in the message area. Xiaobian knows that there is no endless words, and more importantly, remember to pay attention to Xiaobian!

Advantages of outer wall coatings straw paint

Straw paint

About the Author

You may also like these