Delivery cutting loose one word -collar T -shirt production method sharing

That’s right, this is this one, is it very exciting to see the style! Intersection Intersection Next is its production process.

Step 1: Classification and cutting on the fabric according to paper samples

The folds are half width, faced on the right side, and the cloth edge is folded. As shown in the figure, the paper samples are typed on the fabric to ensure that the lower edge of the paper sample 1, 2, and 3 is located on the same pattern stripes. There are many talents in talented clothing technology. There are many 9758510 96 WeChat ruler and tailor chalk. The marks are marked, as follows: 1.5 cm (5/8) at all seams and edges. Draw the measured parts (A) directly on the fabric with fabric chalk. Cut all fabrics.

服装裁剪松紧一字领T恤上衣的制作方法分享

Step 2: Transfer the pattern to the fabric

All tailors, using the tailor carbon paper and tracking wheels to transfer the pattern (seams and hem lines) and all other patterns to the opposite side of the fabric.

Step 3: side sewing

服装裁剪松紧一字领T恤上衣的制作方法分享

Put the front clothes on the back film and face the right side. The side seam of the pin, matching the seam number (1), and ensure that the stripe matches. Insert direct sales and seams into right -angle. You can pass the needle carefully without destroying the needle of the machine. At each seam, fix the edges of the quota together and press the quota to the back.

Step 4: Sleeve seam

Fold each sleeve vertical, face the right side. The pin sleeve seams are matched with seam numbers (2). Set the sleeve seam. Complete the edge of the allowance together and press the allowance to the side.

Step 5: sleeve folding edge

Fold the width of the hem to the side of the back, fold the edges half of the width, and fix the balance in place. Put the hem back in place. Roll the sleeves in the same way.

Step 6: Connect the sleeve

服装裁剪松紧一字领T恤上衣的制作方法分享

Selling each sleeve to the edge of the sleeve, facing the right side. Sleeve joints and sutures must be matched. At the seam of the sleeve and the front part (3), it must be matched. Sew on your sleeves. Switch on the side of the gap with Nish. Starting from each upper edge, pressure to the sleeve, agree. 4 cm (1/8) long.

Step 7: neck strap

Combine the neck with parts (a), the right neck, the right side of the right side, and match the neck line with the joints of the upper sleeve edge of the upper sleeve. Switch on the strap around the neck. Switch on the side of the seam together. Press the straps on the neck. With the help of the tailor’s chalk and ruler, draw a line along the center of the neck, and draw the middle line of a elastic shirt on the inside.

Step 8: Pretend to be a neck zone

Connect the edge of the neck band to the edge of the neck on the top, and the right side faces up, match the neck line with the joints of the upper sleeve edge of the edge of the upper sleeve. There are so many talents in talented clothing technology. 9 758 51096 WeChat sews the strap around the neck. Switch on the side of the seam together. Press the straps on the neck. With the help of the tailor’s chalk and ruler, draw a line along the center of the neck, and draw the middle line of a elastic shirt on the inside.

Step 9: Sewing the elastic curve pumping folds

Lay the elastic line smoothly along the labeled chalk line. Switch on the elastic line with a small curve. These needle cables should be wide enough to grasp the elastic line, otherwise they cannot be pulled out to make shirts. First practice on your fabric. Start and end the stitching on one sewing. Hang each end of the elastic line, about 10 cm (4).

服装裁剪松紧一字领T恤上衣的制作方法分享

Step 10: Sewing other elastic curves

Now sew two more flexible lines on the same way, one close to the upper edge of the neck strap, and the other is connected to the neck strap. Repeat two more elastic threads, half of the middle and online, center and lower threads, that is, 5 elastic threads.

服装裁剪松紧一字领T恤上衣的制作方法分享

Step 11: Stretching elastic line

Stretching elastic cable to collect distance from seams to sewing, to the following width (1 inch = 2.54 cm): 34:43 cm in size, 36:45 cm in size, 38:47 cm in size, 40: 49 cm, 40: 49 cm, and 40: 49 cm. The size is 42:51 cm, and the size is 44:53 cm. Tip: Connect 5 threads together, from every side to the center or center. In each line, elastic lines are tied together.

About the Author

You may also like these